This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

C-Band Receiver and FTA

Status
Please reply by conversation.

jself1982

SatelliteGuys Pro
Original poster
Apr 15, 2006
1,272
0
South Carolina
Can you connect an FTA dish to a C-Band receiver and get KU thru the C-Band receiver? I know the motor wouldn't work but would you get signals thru the C-Band receiver??? Just curious.
 
Most Analog C-Band receivers do both C and Ku band!

All DVB receivers do both C and Ku band!

You require the correct LNBF for each band!
 
sure you can (with a twist)

most C/KU analog boxes can not change polarity of a LNBF (the LNB's most of us use). So they are defaulted to H polarity if hooked up directly. IN those cases, you need to slave it from your digital box.

If you use an old LNB with the 3 wires for polarity (older C Band dishes use these), then you could
 
Status
Please reply by conversation.

Similar threads

S
C band signal problems
Replies
19
Views
1K
sanpat
S
FREE C-band Dish (central B.C.)
Replies
0
Views
387
cyberham
S
C band setup
Replies
5
Views
1K
armadillo_115
S
C band
Replies
6
Views
946
primestar31
S
C band alignment
Replies
4
Views
741
Titanium
Menu
Log in
Register