Can 622 tune to analog OTA

[AJF]

On my 522's I'm able to hook the RF output (channel 3) of my security cameras to the antenna input on the receiver and see the camera image on the TV, but I can't get it to work on the 622. I tried doing a local channel scan expecting it would find the signal on channel 3 but no dice.

Does the 622 only tune to digital channels? Any other way to do this?

 

[navychop]

No analog. Only ATSC digital. Converters are expensive, I hear.

 

[AJF]

SUCK!!! The 921 was nice cause it even had a set of composite inputs to hook something like a VCR (or my cameras) to it.

Thanks Navychop.

 

[vikingrob]

No analog. Only ATSC digital. Converters are expensive, I hear.

Ditto with the 722.

However, I have no use for analog signals in any event.

 

[Jim5506]

Use an old VCR to input to a composite input on your TV.

 

[AJF]

That's not the problem, I already have the cameras modulated to channel 3. The TV is agonizingly slow at changing inputs so I was hoping to be able to just turn off the 622 and the cameras come up like they do on my 522's .

 

[garys]

That's not the problem, I already have the cameras modulated to channel 3. The TV is agonizingly slow at changing inputs so I was hoping to be able to just turn off the 622 and the cameras come up like they do on my 522's .

The 522 allows pass thru on the analog signal. The 622 does not.