I had dish a few years ago and you could do this just wondering if you still can with the hopper? Comes in handy for sports cause for college football it would just say " college football " so I would change the name to whatever teams were playing .
Change names of recordings
- Thread starter kpip99
- Start date
- Latest activity Latest activity:
- Replies 7
- Views 2K
At this time that feature isn't available on the Hopper. I am unable to speculate on when or if it will be, but I will forward that suggestion along.
On the 722 you were limited to all lower except an initial cap.
You cannot match the initial name if multiple words.
The Hopper goes through Upper and Lower, that is, since I use the
keypad to generate them it has these that are not available on the 722.
Note, A=2 B=22 C=222 2=2222 a=22222... space=00 and some others possible.
Now if they just gave us a field to store whatever we wanted, like a user rating.
Just 1 and better say 10 or more characters, pretty please.
And for the EHD, too.
I'm not sure the Hopper is keeping the position of the EHD when reloaded.
I use that to check if seen. I use the protect to show it is all there, sometimes.
-Ken
You cannot match the initial name if multiple words.
The Hopper goes through Upper and Lower, that is, since I use the
keypad to generate them it has these that are not available on the 722.
Note, A=2 B=22 C=222 2=2222 a=22222... space=00 and some others possible.
Now if they just gave us a field to store whatever we wanted, like a user rating.
Just 1 and better say 10 or more characters, pretty please.
And for the EHD, too.
I'm not sure the Hopper is keeping the position of the EHD when reloaded.
I use that to check if seen. I use the protect to show it is all there, sometimes.
-Ken
