coolsat 6000

[draco56]

Hi
I need 89.0w for true south, My receiver only has 87.0w and 91.0w.
Will either one work?

 

[Mr Tony]

you can add 89W. Go to dish install and scroll to bottom. There should be a spot to add a satellite.
Add the satellite as IA8 (or G28)
put in the LNB LO and save
then go to manual scan and input an active transponder (there is a thread at the top that says "I need a strong transponder" and that will list one or two

 

[draco56]

iceberg
Don't have a dish install screen.

 

[Mr Tony]

menu
installation is the first option, right arrow to dish setup (top one). I'm not near my Coolsat so I cant give you the exact name of it

 

[draco56]

I think i found it .
THX. ICE

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[draco56]

went to 0.0e---- rename to 89.0w entered lnb freq does not seem
to work. Can i pick a satellite and change the lnb freq.

 

[colbec]

What type of lnb are you using?

When you were at the "Dish setting" screen what did you try to put in as the LNB type and LNB freq?

 

[draco56]

colbec
invacom snh-031 lo 9.75/10.6 ghz (ebay)
lnb type single 11.780 to 11.780

 

[draco56]

looks like i have a dbs lnb

 

[Mr Tony]

no you have a Universal LNB

set the LNB type to UNiversal in the dish setup

PLEASE LOG IN TO GET RID OF THESE ADS!