correct matrix information

[gwtill]

Hi, I need to know what my matrix should look like when Using a 612 receiver and a 1000.2 antenna. I was told in a thread it should be port 1 = 110, port 2 = 119 and port 3 = 129.

However I see other posts that say it should be port 1 = 119, port 2 = 110 and port 3 = 129.

I am currently trying to point a dish 1000.2 and I currently seeing port 1 = 119 and port 2 = 110 but I am missing 129 on port 3.
If my port 1 and 2 are wrong I am probably pointing the dish wrong but if they are correct I must either have something blocking 129 or a bad LNB.

Help!!! need to know which way to go

 

[Dah-Henny]

From Sadoun's web site: http://www.sadoun.com/Sat/Products/Dishnetwork/Dishes/Dish-1000point2.htm

The default output of the receiver ports is 119° on PORT 1, 110° on PORT 2 and 129° on PORT 3. Note that the output ports do not follow the feed horns, but rather allow for PORT 1 to be used for peaking on 119°, similar to other LNBFs.

 

[gwtill]

Dahenny, Thanks for that input. It appears I was given the wrong info a few days ago. Sure had me chasing my tail for a while trying to get 110 on port 1.

 

[Dah-Henny]

You are welcome.