This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Dear Friends... (A Note about the Sling Adapter Promotion)

Hmm. Just had a thought. We might be able to program the ota channels to record and then watch the playback. So in effect you could watch your local ota's with a very slight delay.

Haven't played with that yet, but we shall see.

Yes it works. The guide shows ota channels from the TV! tuner. So from DRA I scheduled a recording on a sub channel from
Syracuse NY. Locals that I can only get OTA. About 4 minutes after the recording started I went to my dvr and was able to bring the program up and watch it. So while you can't watch ota directly, you can watch an ota channel through the dvr function.
 
Read my post just before yours. They display so that you can record the OTA programs. You can then watch them on delay, even if it's a few seconds of delay.
 
If you have a 722K, you have OTA on TV 1 and TV 2. If you have a 622 or a 722, you only have OTA on TV1.

Read my post #539. Even with a 722 the locals from the TV1 tuner show up on the channel grid on DRA. You can't watch them directly, but you can program them to record on the dvr and watch them later. Even if that later is a minute or less after they started recording.
 

I'm researching the adapter and you caught my attention with this one.
My solution was going to be run one cat6 to the entertainment center and then add a switch to connect all the devices.
Do you think a modern ethernet switch will do a good job instead of an old HUB?
 
No do not use a hub! A modern switch will separate all but broadcast traffic onto local segments. A hub will just repeat everything coming into one port and send it out all the rest. I personally run all GigE switches, and this works well.
 

A switch will be just fine. It's not going to go anywhere near 100 megabit either, and the 722(k) is 100 baseT anyways. I have mine on a switch with no issues.
 

Yep. A switch is the way to go. I used an old (& I mean OLD) hub I had lying around because most of the traffic across it I expected to be just FW updates, and PS3 downloads of trailers, etc. I've now run the ViP722 direct, bypassing the hub. I'll probably get around to replacing that hub with a switch. Heck, I might have one lying around.

At the office, I'll replace my 48 port sw with a giga when the prices come down.


I tried using the sling adapter from the campground. It really doesn't work very well with the slow, tenuous connection, but we COULD manage to watch something if we really really wanted to, and had a high tolerance for pain.
 
Pretty much anything you will work that says switch.. you would have to dig very very hard to find a hub.

I need to clean out my 20 year locker. Sadly, I've begun to let go CD (YES!) and DVD drives with IDE interfaces. Anybody want any Centronics cables? And how did I get all these S-video cables?

At least, I haven't come across any MFM cables.
 
Have any of you with iPads tried to use HDMI out to watch content on a connected HDTV? I have an iPad 1 but with Apple's new HDMI adapter I'm only getting audio, but no video.
 
Resuscitating this thread for a question about wifi equiped tvs. Can you use the sling adapter to sling directly to a wifi HDTV?

I was thinking of adding another HDTV and saw some with wifi built in for apps (netflix, hulu) and thought maybe DISH would have an app or I could sling the TV 2 to the TV this way.
 
It appears that GoogleTV sets will be getting a Sling Player...
 
Have any of you with iPads tried to use HDMI out to watch content on a connected HDTV? I have an iPad 1 but with Apple's new HDMI adapter I'm only getting audio, but no video.

As you asked here too...

Has anybody tried using Apple's new HDMI out iPad cable to watch Sling Adapter content on a connected HDTV? When I hook up my iPad (version 1) to my HDTV via the HDMI adapter I'm only getting audio, no video.

While opening a new thread for something that might exist already is frowned upon ... so to is redirecting message threads ....

... however ... as I posted the reply in the other thread ... so too I've copied that below ...