Dish 1000 with DPP44 switch

[mlb]

What coax connections on the DPP Twin LNBF should I be using? Currently I'm able to see the 119 and 129 satellites (on its own separate LNFB), but not on the 110. Apparently I have something wired up wrong in the dish as it runs to my DPP44 switch.

 

[RandallA]

You have to run 3 lines (one for each satellite) to the DPP44 switch.

 

[mlb]

Already done. The issue is that I can't see the 110 satellite. On the twin LNBF I have ports labeled 1 and 2 running to the DPP44. Is that correct or should I have something else?

 

[mlb]

Found a diagram on the tech portal... I definitely have it right. I guess I'll check the connections and fix later.

 

[RandallA]

Clear the switch matrix, sometimes that helps.

 

[mlb]

Turned out to be an issue with 1 of the cables... now all are working. Sometimes the solution is so simple...