Dish Reception help

  • ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!

    Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!

    We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!

    If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.

    THANK YOU TO EVERYONE FOR YOUR SUPPORT!

jvstrat

Active SatelliteGuys Member
Original poster
May 19, 2004
20
0
I just had dish network put in a 2 room system with the dvr522. When connected with the supplied coaxial cables to the tv there are faint black lines that move from left to right across the screen and at times pixelization and blurry outlines of objects. When I plugged the supplied s-video cable into my tv the lines disappeared, but not the pixel problem. I tried switching the receiver and tv to channel 4 and that didn't help. When I checked the signal for the 119 satellite it showed over 100. Do you guys think if I use my old cable signal amplifier to boost the signal going into the receiver that might fix the issue? How about those in line rca satellite cable boosters they have at radio shack? Thanks for any ideas.
 
jvstrat said:
I just had dish network put in a 2 room system with the dvr522. When connected with the supplied coaxial cables to the tv there are faint black lines that move from left to right across the screen and at times pixelization and blurry outlines of objects. When I plugged the supplied s-video cable into my tv the lines disappeared, but not the pixel problem. I tried switching the receiver and tv to channel 4 and that didn't help. When I checked the signal for the 119 satellite it showed over 100. Do you guys think if I use my old cable signal amplifier to boost the signal going into the receiver that might fix the issue? How about those in line rca satellite cable boosters they have at radio shack? Thanks for any ideas.


Call DISH and have the installer come back out and correct the installation you have 90 days without having to pay for a service call.
 
You should be using the S-Video and stereo audio cables for the best picture & sound anyway. Picture quality will vary from channel-to-channel due to digital compression even if you have a high signal from the satellite. Artifacts will be magnified on a big screen TV.

Chances are you need to calibrate the set. Start by turning the "Sharpness" down and setting the "Brightness" and "Contrast" or Picture down to 1/2. Then get a set-up disc such as Video Essentials.
 

Protect Fair Use

Lockheed launches new HD satellite

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)