Dish Signal to PC

b-ness

New Member
Original poster
Dec 2, 2009
1
0
Minnesota
What's the best way to run an additional cable to my family pc with Windows Media Center? I have a Dish Network setup with TV1 and TV2 running off the 722 DVR. I would like to run a cable feed to my computer, too. I put a splitter on the cable running to TV2 but it made the signal on TV2 very bad and I was still unable to get a signal on the PC. Any help/ideas would be much appreciated.
 
What's the best way to run an additional cable to my family pc with Windows Media Center? I have a Dish Network setup with TV1 and TV2 running off the 722 DVR. I would like to run a cable feed to my computer, too. I put a splitter on the cable running to TV2 but it made the signal on TV2 very bad and I was still unable to get a signal on the PC. Any help/ideas would be much appreciated.

There's no good way to do this. You'll never be happy with the results. I would get another DVR and a 1080P monitor and connect the 2nd DVR and your PC to that 1080P monitor.
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top