Dishnetwork VIP 222K, Wineguard road trip dish, Allegro motorhome with HD wiring (1 Viewer)


Thread Starter
New Member
Sep 23, 2011
New York
I recently aquired a new motorhome. It has a wineguard satellite dish (Road Trip Mission). The motorhome has HD wiring thru out to each tv. The wiring is a 5 wire RCA connector. I assumed that I could just connect these to the rear of the 222K to get a picture. Not so. I checked my connection using the hdmi connector off the dvd home theater unit. So my signal and switch setting are OK.And I get a picture using that setup, but I need to go thru the 5 wire RCA setup to get all the functions that this system has to offer. I think I remember the motorhome service adviser telling me I needed some adapter or power plug to run from the 5 wire RCA connector to the rear of the VIP222K. Does anyone know of this, or can help? Thanks VERY much!


SatelliteGuys Pro
Jun 7, 2010
You should not need any adapters to make the rca/component work.
What functions does the 5 wire (component) have over the HDMI?

Did you try all the inputs of the TV and the controller?

Users who are viewing this thread

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Latest posts