This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Does this look correct?

garyreno

SatelliteGuys Family
Original poster
Oct 26, 2009
49
20
Ohio
Looking at the dish from the front the arm the arm goes out to the left?
 

Attachments

  • 01.jpg
    78.8 KB · Views: 241
  • 02.jpg
    89.8 KB · Views: 253
  • 03.jpg
    78.6 KB · Views: 233
Just checked my signal strengths, if I'm doing it correctly.
129 = 47
119 = 56
110 = 55
Had my dish moved because of trees and now my HD changes to SD any time it rains?
 
The signals vary from transponder to transponder so unless you specify what transponder the readings you're posting came from it's impossible to accurately compare.
 
Do I need to check all transponders?

It wouldn't hurt but you could just specify what transponder numbers the signals you're posting come from so others on the western arc could tell you what they're getting on the same transponders.
 
Reactions: charlesrshell
You're in Ohio, using the Check Switch Screen on your receiver, Transponder 21 on all three sats, you want to see the 110 and 119 in the 70's and the 129 in the mid to high 50's, and yes, your feed arm looks bent
 
You're in Ohio, using the Check Switch Screen on your receiver, Transponder 21 on all three sats, you want to see the 110 and 119 in the 70's and the 129 in the mid to high 50's, and yes, your feed arm looks bent
Mine are far from that good. Phoned Dish to come back out to try again.
 
Reactions: HipKat