I have a DPP+44 switch and a DP34 switch, can I add the DP34 to the additional switch outputs of the DPP+44? The goal is to get eight outputs, or am I just dreaming.
yes, but you won't get the 4th Sat. on the DP-34 receivers.
connect the 1st 3 "to additional switch" outputs on the DPP-44 to the Sat. inputs on the DP-34. The DP-34 will then be able to supply 4 recievers with those 3 Sat's.
I asked this on another forum and others were concerned that the Power Inserter(although connected only to receiver port 1 of DPP44) would burn up the DP34.... I couldn't imagine why the power would go into the pass through ports, but just curious....
Has this been tested somewhere because I would like to do the same thing.
I asked this on another forum and others were concerned that the Power Inserter(although connected only to receiver port 1 of DPP44) would burn up the DP34.... I couldn't imagine why the power would go into the pass through ports, but just curious....
Has this been tested somewhere because I would like to do the same thing.
Specifically the 4th satellite, if you have one. If you only hook up 3 satellites to the dpp44, then you see all 3 on the dp34. Just wanted to clarify, didn't want anyone out there thinking you always lose one