I am thinking of changing my current all DP34 setup:
I have a Dish 500 and two Dish 300.
The 500 has DPP Twin LNB The Dish 300 has DP LNBs
Two RG6 cables go from the DPP Twin to Input Ports 1 & 2 on the DPP44.
One RG6 from each of the Dish 300 goes to Input Port 3 (129) and one RG 6 goes Input Port 4 (TBD).
Trunk 1 from the DPP44 goes to Input 1 of the DP34
Trunk 2 from the DPP44 goes to Input 2 of the DP34
Trunk 3 from the DPP44 goes to Input 3 of the DP34
Will this work going from a DPP44 to a DP34?
I have a Dish 500 and two Dish 300.
The 500 has DPP Twin LNB The Dish 300 has DP LNBs
Two RG6 cables go from the DPP Twin to Input Ports 1 & 2 on the DPP44.
One RG6 from each of the Dish 300 goes to Input Port 3 (129) and one RG 6 goes Input Port 4 (TBD).
Trunk 1 from the DPP44 goes to Input 1 of the DP34
Trunk 2 from the DPP44 goes to Input 2 of the DP34
Trunk 3 from the DPP44 goes to Input 3 of the DP34
Will this work going from a DPP44 to a DP34?