DTV World LNB for Orby

[Tvland1]

I found this DTV 36LNB-02 in my stack of old lnb's and wondering if it can be used for Orby.. Getting bored and thought I would try building a dish for my camper

 

[Cosmo Blatz]

Don't know. But, new high performance LNB's are dirt cheap.

 

[FTA4PA]

I found this DTV 36LNB-02 in my stack of old lnb's and wondering if it can be used for Orby.. Getting bored and thought I would try building a dish for my camper

I've never tried one. It appears to be used for DirecTV international channels on 95W. Lyngsat says North American KU (which would indicate it would work) but also says DSS. Would be an interesting project. Perhaps someone who knows a lot more about this stuff like Titanium will comment.

DIRECTV Satellite 95 W LNB for 36" World Direct Satellite Dish (DTV36LNB)

The DTV36LNB is the required SatelliteLNB to receive certain DIRECTV? International programming on satellite 95?. It's mounted on... Learn More!

www.solidsignal.com

Galaxy 3C & Spaceway 3 & Intelsat 30/31 at 95.0W - LyngSat

 

[Titanium]

Yes, it will work fine. Linear KU with LO 10750

 

[FTA4PA]

Yes, it will work fine. Linear KU with LO 10750

I knew you would have the answer! Thanks!

 

[Titanium]

The scalar is designed for illuminating the DTV World dish, so best to use with the original elliptical dish.

 

[Tvland1]

Yes, it will work fine. Linear KU with LO 10750

Thanks Titanium..I kinda thought it would but didn't want to spend an hour aligning dish and finding out later it didn't work.