DVR625 tv2 snowy picture tv1 ok HELP

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

ederd60

New Member
Original poster
Jan 17, 2006
3
0
dvr625 tv2 picture is snowy, had another tv a while back same place had great picture. TV1 has great picture,talked to dishnet no help. hooked tv2 up with short piece of cable no change ,just to rule out bad connection. Any help is apreciated! ederd60@bellsouth.net
 
Last edited:
Are you getting video at all or just snow? Make sure tv 2 remote is in sat mode and then push the tv video button on remote. It acts like a tv/vcr button on old vcr's.
 
Best bet is to go into the menu, under installation then modulator setup. You'll be able to see what channel tv2 is on, most likely 60 or 73.

If your on 60, make sure your tv is in Antenna mode, not cable.
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)