This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

FTA switches...indoors or outdoors??

Do you have your switches for your FTA system indoors or outdoors?

  • all are indoors

    Votes: 14 26.9%
  • all are outdoors

    Votes: 26 50.0%
  • most are indoors

    Votes: 5 9.6%
  • most are outdoors

    Votes: 7 13.5%

  • Total voters
    52
  • Poll closed .
Status
Please reply by conversation.
I have used the DMS 4 port DISEqC switch and had it "cease" in the cold several times. Often it would take a few seconds to switch but sometimes not switch at all. I switched to a Chieta and no problems since.
I have the switch mounted in a weather proof box with sealed electrical connectors to run the cables in and out. Keeps everything nice and dry. Temps can get to -40F here sometimes.
C.
 
In my setup, all outdoors for the simple reason(s) that, I only have to run one coax in to the house (for now) and also if one fails from getting wet/corroded, it's cheaper to replace it than run 5 separate runs of cable (more later). With a bit of weatherproofing or just some shelter to keep the rain from falling directly on it, it'll probably last for years. So far it's been outside more than 2 years with no ill effects.
 
Status
Please reply by conversation.