Gearing up for the next contract negotiations with Dish, Equipment change

[Former member 209475]

I have been using old and outdated equipment for a long time and would have switched out to the Hopper and other associated new stuff but here's the rub, my monthly rate would literally double.

Obviously they could not sell me on this. Anyway, my current configuration is two 922 receivers and a wally, (I also have a second Wally for my RV which is currently spare)

So, here's what I want to do, use the single 922, and the 2 wally's. First this should drop my monthly rate because Pay for 2 outputs for each 922, and eliminating one of these and swapping in a Wally would only count as one.

Now the big question will my current dish (which I think is a dish 500) support the single 922 and 2 wally's? I would switch over to a newer system but don't want the additional cost, plus I think in the future I will end up just dumping satellite all together and move to streaming full time. Thoughts please?

 

[tjboston5676]

A 1000.2 dish and lnb will support it as there's 3 outputs on the lnb.if you truly have an old dish 500 then you'd need to add a switch for more outputs or upgrade to a 1000.2