H20 and Changing Channels

[RawisTheGameHhH]

I did a quick search and didn't find anything; is there a way to speed up the black screen in between changing channels; it averages about 5 seconds in between; thanks

 

[iwc5893]

You can turn Native off if you have it on. You can also switch from HDMI to component cabling.

 

[RawisTheGameHhH]

You can turn Native off if you have it on. You can also switch from HDMI to component cabling.

I have component cabling; I will try to turn native off; thanks; if i can find it

 

[Jimbo]

I have component cabling; I will try to turn native off; thanks; if i can find it

Menu > Set Up > System Setup > HDTV > Native On/Off

Jimbo

 

[RawisTheGameHhH]

my native is set to off already; is there anything else i can do?

 

[raoul5788]

my native is set to off already; is there anything else i can do?

Make sure the display settings match your display. If you have a 720p display, uncheck the 1080i setting.

 

[gip]

I have the same problem with my h20. Started about 3 weeks ago. Takes about 5 sec for channel to change. I am connected with hdmi in native mode to Sony 46xbr2

 

[Hemi 6.1]

HR 20 is worse,I have no cmplains with H20