This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

GEOSATpro Help need reset my Geosatpro receiver!

N5XZS

SatelliteGuys Pro
Original poster
Jan 23, 2005
4,525
2,555
Albuquerque, NM, USA
I try rebooting my receiver but no luck. I think my video went to 50 Hz, so can you help my by step to step by going blind remote controling to get back to 480i 60 Hz and work my way up.

Thanks....
 
Base video setting on MicroHD is 480i 60Hz normally as default, I believe. At least on the small plug-in video cord. You might want to try that if you still have the cord.

Try this: Hit 'Menu', then "down arrow" twice (this might vary depending where you last were in the menu), then "right arrow"once, then 'List-OK" then 'Right arrow' and see what happens... Each "right arrow' press changes to another resolution, provided you actually are on the Resolution screen. Once you get it where you want it, hit 'Exit' 3 times in a row.
 
Can you plug it into a computer monitor with the HDMI? The monitor can display all the modes.
 
As Primestar31 correctly stated, the AV RCA output is always 480i / 60hz. If there is no video on the AV you might try walking through a blind factory reset or restore firmware via the TTL serial port.
 
Magic and Titanium, Will try using my computer monitor and if dose not work I will buy other new Micro HD receiver.
 
It did not work on my HP computer monitor, so I ordered an new Micro HD receiver for the time being it's should arrived by end of this month. As for older version I will keep as a back up.
 
You must log in or register to reply here.

Similar threads

K
GEOSATpro Need to reprogram data for 1 channel on Geosatpro HDVR3500
Replies
5
Views
413
Titanium
R
OTHER FTA newb trying to set up a GT Media V7 pro need help
Replies
3
Views
1K
arlo
B
OTHER what Satellite Receiver Box is good to get
Replies
1
Views
830
KE4EST
OTHER DC2 DSR receiver question
Replies
3
Views
647
FTA4PA
S
AMIKO FTA Receiver / Equipment Support
Replies
2
Views
1K
KE4EST
Menu
Log in
Register