I have one OTA channel that sometimes displays a window that says my HR20 is searching for a signal even though the picture is there with no apparent problems. When I go to the signal strength meter for the OTA antenna this station is 100% on both tuners. Happens quite often but not always. Any ideas how to make it not do that?
help with HR20 OTA signal qlitch
- Thread starter Ricknau
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
Do you do the C.E. stuff ???
You can always try doing a reboot and see if that takes care of it, if you haven't already ...
You say you get the channel fine but the SfS copmes up.
Are you using D* for your locals or OTA, IF OTA try adjusting your antenna slightly, you must have the signal but only on the fringe, but it's odd that the channel does still come in though.
Is this possibly from D* and MPEG 4 ?
Jimbo
- Status
