How to cascade Legacy SW-64 with SW-21

[saguaro]

I need advice on how to cascade two Legacy switches. I'm running one 622 with slave and two 508's. My Legacy switch is a 6-4, with WaveFrontier LNBs at 91 (for Bell, with no switch), 110, 119 (and 129 waiting to hook up). I have 61.5 on a separate Dish-300 in order to get Euronews on channel 900. Now I need to add 129 to get FOXAZ on channel 365. I have available two SW-21 and two SW-21X to cascade. Which side of the SW-64 do I use to cascade the switch to 129 satellite?

 

[saguaro]

How do I cascade Legacy SW-64 with SW-21 ?

I need advice on how to cascade two Legacy switches. I'm running one 622 with slave and two 508's. My Legacy switch is a 6-4, with WaveFrontier LNBs at 91 (for Bell, with no switch), 110, 119 (and 129 waiting to hook up). I have 61.5 on a separate Dish-300 in order to get Euronews on channel 900. Now I need to add 129 to get FOXAZ on channel 365. I have available two SW-21 and two SW-21X to cascade. Which side of the SW-64 do I use to cascade the switch to 129 satellite?

I should have titled this as a question and not as if I made a statement !

 

[rcdallas]

You would go SW21 after SW64.

I dont quite understand what your wanting....

Looks lik 91/119/110/129/61.5 all at one time, you can't do that with a SW64 and SW21, SW64 is 3 orbitals +1 with the sw21.

If you want five then you need DPP44 + DP21

 

[Pepper]

you're getting bell and dish on the same equipment? How does that work?