when i hook up my micro hd and use diseq for the antenna, i want to use the same satellite positions because of the count. like my 97w is 26 on both the openbox solomend and the azbox. will the micro hd adapt easily to my present setup? charlie
i am using diseq 1.2 on my solomend and azbox
- Thread starter chaskuchar
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 1K
yes
you have 1-99 to pick from on the Diseqc 1.2 option
me personally I started 1 with my true south then from E-W
61 is 2
72 is 3
and so on
but you can do however you want
you have 1-99 to pick from on the Diseqc 1.2 option
me personally I started 1 with my true south then from E-W
61 is 2
72 is 3
and so on
but you can do however you want
As Iceberg stated... Remember that the microHD has 99 + 0 DiSEqC 1.2 motor positions. This may exceed the available settings for your other receivers.
Similar threads
