I have dish 1000 dish with 2 cables connecting to single node, will I be able to use dual node with

[zxcvb531]

just check my dish and found I have dish 1000 dish with 2 cables connecting to single node and no sign of a third cable, will I be able to use dual node with these cables, all schematics show 3 cables from dish to dual node[FONT=arial, sans-serif]. Currently have hopper sling and 2 joeys, I want to add another hopper sling and joey to my system[/FONT]

 

[TheKrell]

Nope. You must have 3 cables from a DPP switch to feed two Hoppers.

 

[papalittle]

Nope. You must have 3 cables from a DPP switch to feed two Hoppers.

Or a dual node.

 

[zxcvb531]

who's right, 3 cables from dpp switch (where is dpp switch) or can I connect the 2 cables from dish to dual node. right now 2 cables are connected to single node,

 

[agentc13]

You need 3 lines to a duo node for a 2 Hopper system.

 

[TheKrell]

Sorry for the missing node info. You need 3 cables (one for each satellite location) going from a 1000.x combo antenna/LNB/switch going to the dual node. Then you need two cables going from the dual node to the two Hoppers.

 

[sparc]

wiring diagrams: http://www.satelliteguys.us/showthread.php?t=279755