I have dish network & changed TV/duo TV 1 & TV and can't get TV to to work HELP

[Harley123]

I have dish network & changed TV's /I have a HD DuoDVR for TV 1 & TV & can't get TV2 to work HELP

I have a HD DuoDVR for my front room which is where I have the dish network receiver which is shared with TV 1 & TV 2 is my bedroom and I gave my TV to my grandson & I put another TV in the room and can't get the satellite to work with the TV or even recognize that I even have a satellite in the bedroom. What am I suppose to do. I'm so irritated because i use my TV in my bedroom alot. But it's driving me crazy. Any help would be SO SO appreciated.
Thanks, Harley123

 

[RaymondG@Dish Network]

Hi Harley123,

I understand your frustration and I am more than happy to help. Please send me a PM with your phone or account number so I can assist you with this issue. Thanks!

 

[osu1991]

Did you go into the menu's of the tv and perform a channel scan. More than likely the channel that the Sat receiver is outputting is not stored in the memory of the new tv.

 

[JeffN9]

Not sure but your issue might be related to the problems others have been reporting with the 922 going into solo mode on it's own and not outputting a signal to TV2. If you haven't done so already try doing a power cord pull to re-set the receiver. You might also want to go into the menu and make sure that shared view is turned on and that it's in dual mode.

 

[Pepper]

The new TV needs to be tuned to the same channel the old TV was using when it was there.