I want to add another receiver (1 Viewer)

Timeclock

Thread Starter
SatelliteGuys Family
Pub Member / Supporter
Aug 24, 2010
63
26
tenn
I have 4 WALLY receivers, 1 in my living room, 1 in my bedroom, 1 in my RV and 1 in the garage. Would DN allow me to add one more in the RV bedroom. Also are the WALLY receivers sold on Amazon excepted on Dish.
 

HipKat

SatelliteGuys Master
Pub Member / Supporter
Aug 25, 2017
8,786
14,021
Pekin, IL
I have 4 WALLY receivers, 1 in my living room, 1 in my bedroom, 1 in my RV and 1 in the garage. Would DN allow me to add one more in the RV bedroom. Also are the WALLY receivers sold on Amazon excepted on Dish.
You'll need a 2nd 44 Switch unless you're one of the rare and lucky people who was installed with channel stacking splitters
 

JSheridan

SatelliteGuys Master
Lifetime Supporter
Feb 16, 2008
8,895
9,976
USA
You'll need a 2nd 44 Switch unless you're one of the rare and lucky people who was installed with channel stacking splitters

I wonder why DISH isn't giving their blessing to use the channel stack splitters in residential installs. I heard they're allowed in commercial installs. I've used them in both. :glasses
 
  • Like
Reactions: charlesrshell

HipKat

SatelliteGuys Master
Pub Member / Supporter
Aug 25, 2017
8,786
14,021
Pekin, IL
I wonder why DISH isn't giving their blessing to use the channel stack splitters in residential installs. I heard they're allowed in commercial installs. I've used them in both. :glasses
Yeah, they've been using them in commercial installs for over a year and we were told that they'd be out to all the offices and RSP's last September.... I have more issues with Wallys and 44 Switches.....
 

Timeclock

Thread Starter
SatelliteGuys Family
Pub Member / Supporter
Aug 24, 2010
63
26
tenn
Sorry for not responding sooner -- what was installed was a 2 lnb eastern arc dish with one wire going to a Holland HFS-3D 3-Way Coax Splitter driving 3 tvs with a Holland HFS-2D 2-Way Coax Splitter off one lead to drive the RV . It all works great. On another note, what are the steps to get a 40.0 remote and 52.0 remote to operate the same wally.
 

HipKat

SatelliteGuys Master
Pub Member / Supporter
Aug 25, 2017
8,786
14,021
Pekin, IL
Sorry for not responding sooner -- what was installed was a 2 lnb eastern arc dish with one wire going to a Holland HFS-3D 3-Way Coax Splitter driving 3 tvs with a Holland HFS-2D 2-Way Coax Splitter off one lead to drive the RV . It all works great. On another note, what are the steps to get a 40.0 remote and 52.0 remote to operate the same wally.
Hit system info on the front of the receiver, then hit Sat on the side of the 54 remote or on the top of the 40 remote and it'll pair to the receiver
 
  • Like
Reactions: charlesrshell

Users who are viewing this thread

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Latest posts

Top