The LNB you've shown is not compatible with a 1000.4 dish. Note in the photo below the differences in the ports and the notches at the bottom of the correct 1000.4 WA LNB.
The LNB you've shown is not compatible with a 1000.4 dish. Note in the photo below the differences in the ports and the notches at the bottom of the correct 1000.4 WA LNB. View attachment 152691
Your photos show a 1000.4 dish. The 1000.2 does not have the elevation fine tuning rod. Your port identification photo is correct, although with a DPP LNB it's pretty much irrelevant since the receiver controls the satellite selection using switching built in to the LNB. Any of the LNB ports can receive any of the sats. Except the input port of course...
Your photos show a 1000.4 dish. The 1000.2 does not have the elevation fine tuning rod. Your port identification photo is correct, although with a DPP LNB it's pretty much irrelevant since the receiver controls the satellite selection using switching built in to the LNB. Any of the LNB ports can receive any of the sats. Except the input port of course..
Are you attaching a side dish to pick up another satellite? That coax would go on port 4 of a 1000.4 WA LNB. The symptoms of a bad switch might be that one or more output ports don't work if the LNB works at all. Which receiver are you using?