Can someone do a schematic diagram as to where the 6 outputs on the new legacy reverse band lnb connect to on the DSWM-30 multiswitch. Thank you.
Sent from my iPhone using Tapatalk
If I can get to a PC with a drawing program, I will later ...
But for now, since you currently have a SWiM-8 module which happens to look alot like the new DSWM-30.
Just imagine your SWiM-8 is a DSWM-30. The current 4 lines from the dish connect to 4 input ports located in the same position on the -30. And then two additional lines for the Reverse Band connect to two inputs on the -30 located in the same position (but not the same name) as flexports 1&2 are on the SWiM-8.
The difference here is though, that instead of connecting the 95W dish line directly to where flexport 1 is on the SWiM-8. The line will connect to a new diplexer (model # WD-DIPLEXER-09) placed in the 5th line from the SL5RB LNB which connects to a port on the -30 in the same position as flexport 1 is on the SWiM-8.
At the dish the current 4 lines run through the LNB support arm as normal.
However, the two new lines for the RB must run along the outside of the support arm and secured to it with either zip ties. Or new cable clamps DIRECTV will provide.
Sent from my LGMS550 using Tapatalk
