IPTV / FTA receiver

[glover31]

Is it possible to use openbox x3 firmware on openbox s9- s12 stb's. I see that all the boxes are linux based. So I wondered if the boxes were all the same. Would be nice to add youtube to my s9 or s10

 

[Mr Tony]

moved thread to FTA area

 

[Titanium]

Linux doesn't mean compatibility. Compare the flash size and tuner to make sure that they are the same. Bootloaders will be different. Likely that you would also need to get a remote as the key codes are probably different.

 

[glover31]

s9

*Chipset and Memory:
Chipset: Ali M3602
CPU: 396MHz
Flash: 4Mbytes
RAM: DDR2-1Gbit

*Tuner:
Twin Tuner PVR
Input Frequency:950~2150MHz
Loop Out Frequency:950~2150MHz
Input Level:-65~-25dBm
Input Impedance:75??
LNB Power: Auto/14v/18v/OFF, Imax = 500mA



x3

*Chipset and Memory:
CPU: 396MHz MIPS dual core
Flash: 4Mbytes
Ram: DDR2400 128mb
clock spead 198mhz

*Tuner:
Single Tuner
DVB-S2 Standard
DVB-S2 demodulator
Input Frequency Range
950MHz~2150MHz
Input Signal Level
-25dBm ~ -65dBm
Demodulation
QPSK, 8PSK, 16APSK
Transport Stream
MPEG-2 ISO/IEC 13818 Transport Stream Specification
MPEG Profile Level
MPEG-2 SD, MPEG-2 HD, H.264/AVC SD, H.264/AVC HD
LNB Power & Polarisation
Vertical +13.5V, Horizontal 18V, Current: MAX 500ma


not looking like this will work