KBRO-LD is going to ATSC 3.0 in 8-1-20

[N5XZS]

Just found out from AVS forum, saying KBRO-LD on rf ch. 2 is going to ATSC 3.0 on 8-1-20 in Denver's TV market.

Will run at 3 Kw ERP!

 

[comfortably_numb]

RF-LO channel 2 at 3 Kw? Will anybody be able
to actually receive that?

 

[N5XZS]

We will find out the result after August 1st.

Hopefully TV DXers with ATSC 3.0 tuners will be the first to report it!

 

[Tower Guy]

RF-LO channel 2 at 3 Kw? Will anybody be able to actually receive that?

That will be interesting.

The time interleaving of ATSC 3.0 should overcome some of the low band noise disadvantages of 8 VSB. How much remains to be seen.

The station may also opt for more robust modulation scheme with lower bandwidth for an even further improvement. The picture quality will be fine due to the low bitrate of HEVC.

 

[N5XZS]

I bet you that OFDM's signal might have better chances of getting lock in during the E-skips than 8VSB for DXing wise.

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[Tower Guy]

Did you notice that KBRO is owned by Echonet (Charlie Ergan)?

 

[comfortably_numb]

Did you notice that KBRO is owned by Echonet (Charlie Ergan)?

Guess it makes sense, since he's based out of Englewood and lives in Highlands Ranch (or so I hear).

 

[Trip]

Er, isn't that Echostar?

- Trip

 

[larrykenney]

Someone asked if anyone is going to be able to watch KBRO-LD with 3 kw on channel 2. Well, KQRO is running ATSC 1.0 on channel 2 with 3 kw and i receive a solid signal from it 55 miles away from the transmitter site. ATSC-3.0 is supposed to be better than ATSC 1.0, too!

Larry

 

[comfortably_numb]

Someone asked if anyone is going to be able to watch KBRO-LD with 3 kw on channel 2. Well, KQRO is running ATSC 1.0 on channel 2 with 3 kw and i receive a solid signal from it 55 miles away from the transmitter site. ATSC-3.0 is supposed to be better than ATSC 1.0, too!

Larry

You're also a professional and you own really good antennas

PLEASE LOG IN TO GET RID OF THESE ADS!