The local channels on the guide are not updating. I only have programming for the next two hours. Any ideas on how to fix this? I have restarted the system already.
Thanks!
Thanks!
Local Channels
- Thread starter jdubs
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Press the menu button on the remote.
Then press 6 on the remote
then press 1 on the remote
then press 1 again on the remote.
This puts you in the point dish screen. Select "Check Switch" Wait. When done press okay or done or cancel depending on the model.
Wait for the guide to be loaded. (takes 5 minutes or so)
Good luck.
See ya
Tony
Then press 6 on the remote
then press 1 on the remote
then press 1 again on the remote.
This puts you in the point dish screen. Select "Check Switch" Wait. When done press okay or done or cancel depending on the model.
Wait for the guide to be loaded. (takes 5 minutes or so)
Good luck.
See ya
Tony
