I have my ViP622 (L441) set to map HD preference. The guide should be and has been up until this point as follows:
KDFW: Channel 4 (mapped from 6386)
KXAS: Channel 5 (mapped from 6385)
WFAA: Channel 8 (mapped from 6383)
KTVT: Channel 11 (mapped from 6384)
Now, the STANDARD def versions are mapped to those locations. I can only access the HD versions by going to the 6300's. I tried rebooting---no help. I tried changing the channel display from "HD preference" to "HD and SD", then back again with no change. (BTW: while I briefly had it set to "HD and SD", only the SD versions were visible in the mapped range).
Anyone know what's going on?
KDFW: Channel 4 (mapped from 6386)
KXAS: Channel 5 (mapped from 6385)
WFAA: Channel 8 (mapped from 6383)
KTVT: Channel 11 (mapped from 6384)
Now, the STANDARD def versions are mapped to those locations. I can only access the HD versions by going to the 6300's. I tried rebooting---no help. I tried changing the channel display from "HD preference" to "HD and SD", then back again with no change. (BTW: while I briefly had it set to "HD and SD", only the SD versions were visible in the mapped range).
Anyone know what's going on?