This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

MicroHD Sensibility

V

Vondertrenk

SatelliteGuys Pro
Original poster
Aug 30, 2007
294
38
Canada
I would like to share my experience with the MicroHD sensitivity starting a new thread.
I aimed my 6ft Fortec dish to 87W, got all the channels even the RTV Chs at 3800. Swapped my box with my old Openbox S9, no signal at all for 3800, only RVT channels from 4800. I assume the MicroHD tuner is more sensitive than the S9's.
Has anybody else tried a test like this with other receivers?
 

I have to change my LNB, I was using a Ku/C LNB and I noticed there was a little bit of signal at 3800. THen I Decided to use a dual C-Band LNB. Bingo! Now, as you said, the saddest part is that the programs are almost the same, just another 48 channels of the same RTV Et Al. But still is one or two new channels there.
By the way, my dish is only a motorized 6', like yours.
 
I tried with my WSI Bargain 6ft and Dual out put C-Band LNB to get those without success. I really don't know why I'm not picking those up. BTW, where are you located? Maybe the foot print is not very strong over here.
 
You must log in or register to reply here.

Similar threads

GEOSATpro microHD: No LNB Voltage Output
Replies
4
Views
162
cyberham
GEOSATpro microHD Database Editting
Replies
10
Views
2K
cyberham
T
GEOSATpro GEOSATpro MicroHD boot loop
Replies
20
Views
3K
primestar31
GEOSATpro GSP MicroHD channel editor Muzak PID issues
Replies
3
Views
2K
cyberham
G
GEOSATpro MicroHD remote repair or replacement.
Replies
6
Views
1K
Radioguy41
Menu
Log in
Register