i moved about 8 months ago... no dish installer nearby...i've been working a lot, and occasionally when i have free time, i searched for any installers. none where i moved.
so i thought i'd do it myself. here's
a) my equipment
b) problem
a) i have a 501, and a 921.
dish 500, dp lnbs, with 2 out puts, one for 119, and one for 110.
another, dp lnb, two outuputs, one i use for 61.5.
a dpp44 switch
a dp34 switch (not going to be used)
b) ok...501 works fine, sees everything from dpp44, which would be a signal from 119, 110, and 61.5. upgraded my 8 month old firmware no problem.
921 on the other hand, everytime i do a switch test, it reboots. so i tried switching it out with the dp34, and do a switch test, and it reboots. so i ran two lines directly from the other dish 500 i use for 61.5, and it goes through 2 of 2 tests, then a white screen with an X appears, and it reboots.
any help? please?
so i thought i'd do it myself. here's
a) my equipment
b) problem
a) i have a 501, and a 921.
dish 500, dp lnbs, with 2 out puts, one for 119, and one for 110.
another, dp lnb, two outuputs, one i use for 61.5.
a dpp44 switch
a dp34 switch (not going to be used)
b) ok...501 works fine, sees everything from dpp44, which would be a signal from 119, 110, and 61.5. upgraded my 8 month old firmware no problem.
921 on the other hand, everytime i do a switch test, it reboots. so i tried switching it out with the dp34, and do a switch test, and it reboots. so i ran two lines directly from the other dish 500 i use for 61.5, and it goes through 2 of 2 tests, then a white screen with an X appears, and it reboots.
any help? please?
Last edited: