Mutli Connection from 2 Dish

[arshad07]

Hello Satguys

i have an unique problem with the multi connection ,Below you will see the
daigram, i have set up 2 Rcvr, if rectified i will increase to 4 Rcvr

 

[Anole]

I've been at this quite a while, and don't see what your goal is.
Take a look at the Switches Simplified FAQ.
It shows a number of workable examples.
.
So, what sort of receivers are you using?
And which satellites have your fancy?
.
?

 

[rv1pop]

if what you want is either polarity from each receiver at any time, you will need dual output LNBFs. You will not need power dividers.

Then look at Anole's link. EASY. but you will need two cables from each LNBF (an H and a V).