My HR20-700 Died

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.

ImaSpotbeam

Active SatelliteGuys Member
Original poster
Sep 19, 2007
19
0
Orange County, CA
I wanted to get some commentary and opinions out there...
I came home to find my HR20-700 dead today. I turned the TV on and hurn this popping sound and the receiver had no lights on. So after many useless remedies offered by the CSR (all pretty much variations on RBRs) she ordered me a replacement receiver. I got it today and its an HR20-100, and its reconditioned. Can someone tell me the difference besides the obvious box size difference and weather they have heard of the symptoms my receiver had?
 
I thought mine died tonight as well.

I got home and it wouldn't turn on, no lights on the front. Only a grey screen showing. I hit reset and nothing. Pressed reset again and it finally came up.

I am running the latest CE for the HR20-700.
 
I thought mine died tonight as well.

I got home and it wouldn't turn on, no lights on the front. Only a grey screen showing. I hit reset and nothing. Pressed reset again and it finally came up.

I am running the latest CE for the HR20-700.

My HR20-700 was dead the other day, too. I had to unplug it to get it to fire up.
 
The latest CE is not one of D*'s better efforts. I haven't seen so many posts from folks at DBS saying they're going back to the national release due to problems.
 
The latest CE is not one of D*'s better efforts. I haven't seen so many posts from folks at DBS saying they're going back to the national release due to problems.

I think this happened once before where they had a bad release and people were going back, but I think D* came right back out with another release on the next Monday or Tuesday.

So far, I have not had any problems with the latest CE ....

Jimbo
 
I was using an older CE, I think something like 9D. Thats good your guys' came back to life after doing some resets....I tried them quite a few times to no avail.
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)