This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Need help setting up Traxis 3500

Status
Please reply by conversation.

Gary Z

SatelliteGuys Pro
Original poster
Jun 27, 2005
942
0
Seguin, Texas
I'm pointed at IA 5 I did the auto scan, It only scans in all the horizontal channels, no vertcal channels are scanned? What I'm I doing wrong?
 
My LNB power is on..... In my scan mode settings I have ALL and FREE I don't see a blind scan mode.
 
shoot. I dont have a 3500 so I dont know about the menu....I know PSB has one. Hopefully he will respond
 
I found something that said preset scan I scanned with that... I could see it scanning both H/V but I get no signal on the Vertical only horizontal. Maybe I have my LNB set up wrong?
 
Thanks Guys, I think its working now I had my LNB type set to user, I changed it to standard and it works. Except it won't scan in 12177 where the TBN Channel is or any other Channels on the Freq. Any ideas about that?
 
I thought it was fixed I have all the Vertical Channels and no lost all the Horizontal???

Any Ideas?
 
A big Thank you To Ice and PSB.... all problems now solved. LNB type set to standard and set LNB Freq set to 10750 made all the difference.
 
Status
Please reply by conversation.

Similar threads

T
Tips and Advice for Setting up Hughesnet Raven and GTMedia V7
Replies
7
Views
1K
arlo
F
Help Needed:
Replies
45
Views
4K
a33
A
Need help receiving PBS on 99W with my setup
Replies
11
Views
1K
C-BAND Satellite Discussion
Long Hair
R
OTHER FTA newb trying to set up a GT Media V7 pro need help
Replies
3
Views
1K
FTA Receiver / Equipment Support
arlo
M
Help
Replies
4
Views
737
FTA4PA
Menu
Log in
Register