No 4:2:2 Channels

[Phoxx]

I have "North Americanized" my P+ and now I can not scan in any 4:2:2 channels. Did I miss something? I deleted all the sats, then added all the sats between 60 - 139 degrees West. All of the regular channels work just fine, but, no 4:2:2 stuff???? Might there be a file I erased on factory reset that I must now add?

 

[brentb636]

What 4:2:2 channel, in particular can't you get ? There are very few, relatively speaking.

 

[brentb636]

Try blindscanning 107W Ku, the Canadian 4:2:2 channels are active.

 

[Mr Tony]

If you have C-Band the GDMX stuff should work fine

G16
99W
3820
V
26000

 

[brentb636]

Only problem I see is that the GDMX stuff has no video , when I looked, except for one test pattern. Still , the channels should scan in, they do on mine ! The 107W stuff has active video, if the OP can get 107W Ku.

 

[Mr Tony]

most of the GDMX channels now have color bars and the time at the bottom when not being used. At least the 1st 2 channels do

 

[LocutusOfBorg]

4:2:2 works here on my "North Americanized" Ultra.

 

[Phoxx]

Thanks for your input guys. I was trying to get the 4:2:2 MUX on Galaxy-28. I was able to get a scan now, but the signal is on and off. Are these channels no longer available?