No audio on some channels

[upsss]

HR44/C41, sometimes no audio on some channels. I had the same problem with the HR34/C31. It happens mostly on the client and if I change the channel Up/Dn sometime the audio gets restored. Overall, the 44/41 is much better than the junky 34/31.

I think the problem has to do with switching from HD channels to an SD channel. I am using HDMI on both TVs and there is nothing wrong with the cables. Also, I don't use external Amps and disabling the Dolby Digital setting doesn't help. BTW, never had this problem previously with Dish.

 

[ejb1980]

Happens almost daily for me, too.

 

[texasbrit]

Set the box to native off and check only 1080i/1080p. That will eliminate most of the handshaking and might solve the problem. And make sure Dolby is off.