Retired like new condition from radio station use. Rack-mount 2-inputs, 10 outputs. (5 horizontal, 5 vertical) with "high" output (boosted, I believe) one each of H/V. Its a signal distribution amplifier and power supply for LNB's so you can switch "off" the ones in multiple receivers and run just this one. Mainly commercial use, but possibly good for a large multiple-LNB FTA or similar experimenter's site!
This is not the "A" model usually found in google searches, this one has 110 volt cord attached, not a "wall wart" like you may find in searching the web, but...functions are similar.
This one also has a front panel switch for supply voltage to be either 18 or 20 volts. The "A" does not.
Check out more (general) info at:
http://200.78.236.213/manuals/pico/SSP-10-2150A.pdf
Retail varies. Only posted price for retail found is at:
Megawavz: Pico Macom SSP-10/2150A Rackmount Satellite Signal Processor
Considering reasonable offers via e-mail, will try to check PM's from this site, too. We're hoping for close to half of retail, if possible. Please do make offer! We're here on this site quite often. Reasonable offers considered! e-mail is the best way to contact us via: office@i1430.com
Please include "USED EQUIPMENT" in your subject line if e-mailing so we can catch it from our spam filter.
This is not the "A" model usually found in google searches, this one has 110 volt cord attached, not a "wall wart" like you may find in searching the web, but...functions are similar.
This one also has a front panel switch for supply voltage to be either 18 or 20 volts. The "A" does not.
Check out more (general) info at:
http://200.78.236.213/manuals/pico/SSP-10-2150A.pdf
Retail varies. Only posted price for retail found is at:
Megawavz: Pico Macom SSP-10/2150A Rackmount Satellite Signal Processor
Considering reasonable offers via e-mail, will try to check PM's from this site, too. We're hoping for close to half of retail, if possible. Please do make offer! We're here on this site quite often. Reasonable offers considered! e-mail is the best way to contact us via: office@i1430.com
Please include "USED EQUIPMENT" in your subject line if e-mailing so we can catch it from our spam filter.
