Prof 7500 linux driver mods

Status
Please reply by conversation.

updatelee

SatelliteGuys Pro
Original poster
Jul 22, 2006
1,604
112
CFB Edmonton
this modifies the stv0900 src so that when you tune a freq ( FE_SET_PROPERTY ) that when it does it's little adjustments, it saves those settings in the same u.data variables you used to tune with, that way when you do a FE_GET_PROPERTY you can actually pull the info.

the Prof 7500 search +/-5mhz for the signal, and +/-10000 SR, does auto system (dvb-s/dvb-s2/dss), auto modulation (qpsk/8psk), auto pilot, auto rolloff, auto inversion, and auto fec.

so you can put in super generic tuning info, then do a FE_GET_PROPERTY and pull all the specifics out so you can use it in your other tuners that dont do all that fancy stuff.

Code:
--- stv0900_core.c.orig	2010-06-21 13:12:09.032070510 -0600
+++ stv0900_core.c	2010-06-19 13:06:38.532428739 -0600
@@ -1629,6 +1629,15 @@ static enum dvbfe_search stv0900_search(
 		p_result.spectrum = intp->result[demod].spectrum;
 		p_result.rolloff = intp->result[demod].rolloff;
 		p_result.modulation = intp->result[demod].modulation;
+
+		// UDL
+		c->frequency = p_result.frequency ;
+		c->symbol_rate = p_result.symbol_rate ;
+		c->fec_inner = p_result.fec ;
+		c->pilot = p_result.pilot ;
+		c->rolloff = p_result.rolloff ;
+		c->modulation = p_result.modulation ;
+		c->inversion = p_result.spectrum ;
 	} else {
 		p_result.locked = FALSE;
 		switch (intp->err[demod]) {

Code:
--- stv0900_priv.h.orig	2010-06-21 13:12:58.282155848 -0600
+++ stv0900_priv.h	2010-06-19 13:11:08.361159042 -0600
@@ -185,7 +185,8 @@ enum fe_stv0900_modcode {
 };
 
 enum fe_stv0900_fec {/*DVBS1, DSS and turbo code puncture rate*/
-	STV0900_FEC_1_2 = 0,
+	STV0900_FEC_NONE = 0,
+	STV0900_FEC_1_2,
 	STV0900_FEC_2_3,
 	STV0900_FEC_3_4,
 	STV0900_FEC_4_5,/*for turbo code only*/
 
Status
Please reply by conversation.
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 1)