Proton/Breeze-M Success (apparently)!

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

Bradtothebone

SatelliteGuys Pro
Original poster
Pub Member / Supporter
Sep 12, 2003
785
6
KC Area
From the ILS launch blog:

"Posted by ILS Communications Team, 8:42 p.m. EDT on 18 August 2008 | 0 Comments

The Breeze M upper stage of our Proton M rocket continues
its climb into space with the Inmarsat-4 F3 satellite. We
have received confirmation that the 1st and 2nd burns of the
upper stage occurred and shut down as scheduled. "

For the complete blog:

Inmarsat-4 F3

Still looking good for Ciel-2 in November! :clap

Brad
 
I believe there are 3 burns to go, but all is looking good. The second burn is where AMC-14 ran into trouble.

Hopefully all continues to go well, and Nimiq 4 goes well in October so Ciel-2 can get going before the year is out.
 
"We have confirmed that the Breeze M upper stage has successfully completed its 3rd & 4th burns, as well as jettisoning its additional propellant tank. The vehicle is now in a 5-hour coast period, during which we will have nothing to report. The 5th burn is scheduled for around 3:35 a.m. Eastern time, or 7:25 GMT. Separation of the Inmarsat 4 spacecraft is scheduled to follow that by about 16 minutes"
 
Why is a Proton/Breeze-M launch so different than an Ariane 5 launch?

A Proton/Breeze-M launch takes about 9 hours and 5 upper stage burns before satellite separation. But the recent Ariane 5 launch of Superbird 7 and AMC 21 took 30 minutes from launch to separation with only two upper stage burns.
 
We have had a successful mission with the Proton M Breeze M rocket, carrying the Inmarsat-4 F3 satellite built by EADS Astrium for Inmarsat. We have had confirmation that the satellite separated from the vehicle on schedule at 3:46 am Eastern time, or 7:46 GMT, 9 hours and 3 minutes after liftoff.

Everything occurred as planned with ignition, shutdown and separation of the Proton’s first three stages. Then the Breeze M upper stage with the satellite continued the mission, igniting five times, then releasing the satellite into transfer orbit.
Thank goodness.
 
Why is a Proton/Breeze-M launch so different than an Ariane 5 launch?

A Proton/Breeze-M launch takes about 9 hours and 5 upper stage burns before satellite separation. But the recent Ariane 5 launch of Superbird 7 and AMC 21 took 30 minutes from launch to separation with only two upper stage burns.
French Guiana is just slightly more than 5 degrees above the equator. Baikonur in Kazahkstan is slightly more than 45 degrees above the equator. More burns are needed to adjust the orbit to 0 degrees (Equatorial).
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)