This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

question about vip722 remotes

I

icyfire

Member
Original poster
May 30, 2008
8
0
Hi,

I currently have my setup like this:
vip722

TV1 is connected via HDMI with 5.3 IR remote

TV2 is connected via coax with 6.3 IR/UHF remote using UHF

I am going to get an additional TV and split the TV2 coax connection to this new TV and the exisiting TV2. I also need another UHF remote. I would like to know which remote model I can buy. The 6.0 UHF is quite cheap on ebay and i'm wondering whether it is compatible with the 722 and whether it is even possible to have 2 UHF remotes for the same connection. Thanks.
 
I went the same route, but bought a 6.3 ir/uhf pre remoted off ebay for around $20. It is possible to have the two remotes for the same connection. You simply need to make sure both remotes are on the same Rem Addr (remote address I assume). My office and bedroom remotes are both on 15.

I cannot comment on the ability of the 6.0 to work with the 722.
 
Change rem addr on remote

So How exactly can you change the rem addr on a UHF 6.0 or 8.0 Dish remote??

thanks..
 
You must log in or register to reply here.

Similar threads

I
VIP722 receiver having issues
Replies
22
Views
2K
ia_Homey
I
From DISH about Locals
Replies
37
Views
5K
jackson85
J
B
Couple of notes about 54.x remotes
Replies
3
Views
1K
HipKat
Dish Remote Question!
Replies
11
Views
637
obermitch
R
Challenging upgrade from VIP722 to Hopper with OTA and Limited Cabling How To Do?
Replies
3
Views
548
RJBreneman
R
Menu
Log in
Register