need help trying to align my shaw direct satilite dish have new dish with the new lmb having trouble setting dish live in blythe california looking for elivation skew if anyone nows were l can find this would apprieciate the help
shaw direct
- Thread starter cody boshman
- Start date
- Latest activity Latest activity:
- Replies 4
- Views 3K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
to Satelliteguys cody boshman!
I have the 75E dish from Shaw and started to set it up. The manual says to use the 111.1 position.
4.
"Locating the Satellites
Step 1:
Determine the direction in which to point the dish. The first two satellites (SAT
A) are located
at 107.3 west longitude; the other satellite (SAT B) is located at 111.1 west longitude. Your xKu LNB
and elliptical dish will be aimed to receive signal from all three
satellites
.
IMPORTANT:
Always use the
SAT B
Azimuth, Elevation and Skew
listings in the Satellite Locator Chart at the
back of this manual for the city nearest your location.
This will ensure alignment to all three satellites"
When I go to dishpointer.com it does not give the skew so I used https://satoms.com/dish-pointing
4.
"Locating the Satellites
Step 1:
Determine the direction in which to point the dish. The first two satellites (SAT
A) are located
at 107.3 west longitude; the other satellite (SAT B) is located at 111.1 west longitude. Your xKu LNB
and elliptical dish will be aimed to receive signal from all three
satellites
.
IMPORTANT:
Always use the
SAT B
Azimuth, Elevation and Skew
listings in the Satellite Locator Chart at the
back of this manual for the city nearest your location.
This will ensure alignment to all three satellites"
When I go to dishpointer.com it does not give the skew so I used https://satoms.com/dish-pointing
Last edited:
at the bottom of the screen in dishpointer for Blythe ca and 111 it shows me
Dish Setup Data
Elevation: 50.7°
Azimuth (true): 173.7°
Azimuth (magn.): 162.7°
LNB Skew [?]: -5.2°
Your skew of -5 you minus from 90 which puts the dish straight up and down so you would set your dish at 85*
Dish Setup Data
Elevation: 50.7°
Azimuth (true): 173.7°
Azimuth (magn.): 162.7°
LNB Skew [?]: -5.2°
Your skew of -5 you minus from 90 which puts the dish straight up and down so you would set your dish at 85*
Similar threads
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Who Read This Thread (Total Members: 1)
Latest posts
-
-
T
-
T
