splitting after receiver

[rspainhower]

I am trying to split my signal coming out of the receiver to the kitchen, and 2 bedrooms. I am it will work in the kitchen but not in the bedrooms. What is the best way to do this. The 2 bedrooms picture is very snowy and makes a buzzing noise.

 

[Mr Tony]

check all cabling...sounds like a loose cable or end

 

[rspainhower]

I noticed that the line that goes to the 2 bedrooms is running up against the main power line coming into the house from the electrical meter. Could this be a problem too?

 

[Beachbum]

I noticed that the line that goes to the 2 bedrooms is running up against the main power line coming into the house from the electrical meter. Could this be a problem too?

Thats probubly it. Noise and other crap is getting in your coax.

 

[tjbeckett]

try putting an antennuator on the cable, this may help out some....

 

[BuckNasty]

the attenuator won't be as much help as just moving the cable to a better spot. you could also try grounding the shield in your coax cable, that might take care of it as well

 

[miller5]

Youve got EMI.

 

[rspainhower]

it was the ends. I changed the ends and it works great. thanks