Troubleshooting help

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

Golfnstanley

New Member
Original poster
Sep 6, 2017
2
0
Alabama
I have dish. My receiver is a vp722. Every time I turn my box off at night and turn it back on in the morning I don't have signal. I have the message of satellite being blocked by obstruction. Resetting it will not get it to acquire the signal nor will unplugging it. To get it to acquire the signal, I have to disconnect one of the three wires at the triplexer and arch it to the threads of the triplexer. Then it will start aquiring the signal and when finished I can watch tv. So is the box going bad or the triplexer?

Thanks,
Stanley
 
My 211k does that too..... no signal in the morning. To get it back, I disconnect the cable at the lnb and move it to a different port. It'll work for one day, then repeat.

Just replaced the lnb but still have the same problem.
 
  • Like
Reactions: Golfnstanley
If it's a 722, not a 722K, in my experience, I have replaced a fair amount of them for not processing signal correctly anymore. The Check Switch Screen shows low or no signal, but a meter on the cable at the Triplexer shows great signal
 
  • Like
Reactions: Golfnstanley

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)