UHF controller not fully working

[A_Pac]

I have a UHF controller that came with my 510 and the uhf part isnt working i think. It works but only if I aim it right at the receiver like if it was sending IR signals

 

[Peter Parker]

Is your antenna installed?

 

[Scott Greczkowski]

Yeah make sure the little metal antenna is screwed in, when I put in my 921 I was so excited I forgot to screw it in and couldnt figure out what I did until after I calmed down a bit.

 

[Ransack]

also make sure you don't have it screwed into the RF out port

 

[A_Pac]

yes its screwed in right and all the way. it was working for a month then just stopped. i have no other uhf receivers

 

[Bobby]

yes its screwed in right and all the way. it was working for a month then just stopped. i have no other uhf receivers

Just for grins, put a new set of batteries in your remote. UHF needs a bit of voltage.

 

[Peter Parker]

And seriously check that antenna. It may have been worked loose.