UHF remote on 622 with qam setup

[fibercnxn]

Is there any way to use a UHF remote for a 622 when on a qam system seeing that shared view is disabled. If so what color key, etc. would be necessary?

 

[8bitbytes]

If the 622 is in Single Mode, the UHF remote should work just like the IR remote.

 

[fibercnxn]

That's exactly right if you are in "point dish mode" but in qam setup it will not work. I want to swap TV2 uhf to TV1 with a 6.3 IR/UHF pro remote.