I have a ViP211z with Winegard Pathway X2 dish for several months..no problem, but recently, I began noticing that the DVR playback would freeze and jump with some pixelation. When starting a DVR program, it can take up to a minute to actually start the playback. Also, the receiver is slow in responding to other remote commands on occasion (new batteries). When scrolling through the guide (up or down...or side to side), after 5-10 clicks, I have to wait a few seconds before continuing.
ViP211z freezes on playback
- Thread starter brlr2000
- Start date
- Latest activity Latest activity:
- Replies 6
- Views 1K
-
ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!
Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!
We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!
If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.
THANK YOU TO EVERYONE FOR YOUR SUPPORT!
I've tried multiple power resets. I haven't tried a new hard drive yet, because some of the problems don't seem to be reaalted to the DVR. All problems started at the same time. When scrolling with remote, receiver doesn't seem to catch up very fast to the key commands. Something else I just noticed...I switched my resolution from 480 to 720 and 1080...then I started seeing some glitches in live tv mode. It almost seems like the RAM isn't keeping up (Is there RAM in the receiver)???
That's a good idea. I'll try it when I get home. I'll let you know what happens...
OK, I unplugged the EHD, and restarted. Everything worked good. Then plugged EHD back in and restarted. Back to same problem. I ordered a new Hard Drive.
Yes, I think your defective hard drive was just dragging down the receiver processor.
