Wally / 1000.2 WA antenna question

[jpmarto]

I've been with Dish forever, so there's no excuse for my lack of understanding about antennas/LNBs. I'd like to approach this project with no surprises as the location is way out in the boonies.

My Wally is connected to a port (probably 1) on a 1000.2 WA DPP LNB (110/119/129).

What, if anything, would I need to connect a second Wally to this antenna?

Thanks for any help!

 

[dishdude]

All you need is to run coax from the LNB to the second Wally. iirc, there are ports for 3 receivers and an input for a 4th satellite location on the LNB, obviously you want to use ports 1-3.

LNBs and switches have changed so much over the years it's tough to keep up.

 

[jpmarto]

Thanks dishdude - that's the answer I was hoping for. It's a 4 hour drive to get to that location, and I wanted to be sure to have everything I needed before leaving here.