Western arc satellite trying to connect to sat 72 on wally on sd channels

[Breakfast97]

I just set up a dish 1000.2 wa satellite, my first, and I show it locked on all three satellites. But when I go to a sd channel like fetv, it shows signal lost, when I check the satellite signal it shows tuner 1 satellite 72 transp 15. All hd channels seem fine. Has anyone seen this before? Thanks.

 

[pattykay]

The first thing I would try is to disconnect the cable from the Wally, and run a Check Switch to clear everything out. Then, reconnect the cable, and run the Check Switch again. See if that helps with this issue.

 

[Breakfast97]

Thank you sir! That fixed it. I had done everything I could think of but what you suggested. Have a great evening!

 

[pattykay]

Thank you sir! That fixed it. I had done everything I could think of but what you suggested. Have a great evening!

You're welcome! That's what I am here for.

 

[Breakfast97]

Thank you again, hopefully this type fix will help others with Wally's and strange problems in the future. I now have my 2-tuner wally with another 2 tuners for OTA with my adapter for 4 total tuners. Finally I can still watch tv when something is recording.

 

[rvvaquero]

Thank you again, hopefully this type fix will help others with Wally's and strange problems in the future. I now have my 2-tuner wally with another 2 tuners for OTA with my adapter for 4 total tuners. Finally I can still watch tv when something is recording.

Now, your only problem is finding something worthwhile to watch or record.

 

[boba]

Now, your only problem is finding something worthwhile to watch or record.

AMEN

 

[Breakfast97]

I just channel surf so that won't be a problem. LOL!